For distribution to affected agencies for review and comment, a copy of the site plan containing the following information should be attached.
1) A scale drawing at one inch equals 100 feet or larger showing all streets (public or private), building sites, any existing platted lots or blocks, areas proposed to be dedicated for street, drainage, park or utility purposes, points of ingress and egress, topography at five (5) foot contour intervals and specific areas proposed for types of land use and any special building or fence lines.
2) Where buildings greater than one (1) story in height and other than single-family detached dwelling on lots are proposed, the elevation or diagrammatic section of such buildings may be required and such drawing shall clearly indicate the relationship and influence of such proposed buildings on the exposure of and the light and air access to adjacent properties.
3) Where the exposure of nonresidential, mobile home park or multiple-family residential uses to developed single-family areas adjacent is determined to require a screening separation to protect the use and value of the single-family areas, a Site Plan shall indicate the location and nature of such screening and the approved screening shall be installed as part of the development shown by the Site Plan.